The JF-104H Mobile DVR is designed to be operated on 12 volt DC power and is ideally suited for covert video recording in remote applications. The JF-104H can be programmed to record at scheduled times, continuously record mode, motion activation, or by manual activation. The included viewer software allows the user to save video evidence to a removable drive (Thumb Drive) via the USB port and then play the video on a PC. The DVR hard drive can also be connected to a PC via a docking station (not Included) for viewing and capture of evidence. The video evidence can be searched by date/time of recording or by the event list. The JF-104H comes with the capability to connect the DVR to a vehicle ignition system to activate the recording of video/audio when the vehicle is started.

The system includes: JF-104H DVR, Operators Manual, Wireless Remote Control, Power Wires, Audio/Video Cable, Signal I/O Terminal, and Mounting Bracket.

Product Features

Designed with shockproof (up to 2GB) protection
Working at DC 11 to 30V (AC100 to 240V optional)
Detect car start and switch off to start and stop record
Protection on car start and low voltage
Delay switch off the DVR while shut off the car
Key-in ID or car number to be recorded in DVR
Video loss alarm
Record lock to protect record function
Record one channel with audio
Hard disk overwriting protection
Design with both Internal/external motion detection
PTZ control through remote control
Daylight saving time auto change
Wireless remote control
Security housing (optional)

Specifications

Model	JF-104H
Video Input Format	NTSC/PAL
Operating System	RTOS in firmware
Video Input Channels	4CH composite
Video Output Channels	2CH Composite
Display Frame Rate	120 frames/sec (NTSC) - 4x30 frames/sec 100 frames/sec (PAL) - 4x25 frames/sec
Recording Frame Rate (Quad mode)	Max 30fps Quad (NTSC) Max 25fps Quad (PAL)
Recording frame (Each Mode)	Max 7.5fps Each Mode (NTSC) Each mode = MAX frame/number of video source - 30 frames/s (per recording CH) Max 6.25fps Each Mode (PAL) Each mode = MAX frame/number of video source - 25 frames/s (per recording CH)
Recording Mode	Continuous, Manual, Event Programmed
Resolution (Display)	720x480 (NTSC) 720x576 (PAL)
Resolution (Recording)	320x112, 720x224 (NTSC) 320x136, 720x272 (PAL) Remarks: Quad: 720x224 (total) Each Channel: 720x224
Compression format (Each channel)	Modified MJPEG (12-20K bytes/frame) Low: 12KB/frame Normal: 15KB/frame High: 20KB/frame
Internal (Software) Motion Sensor	Yes
External (Hardware) Motion Sensor	Yes
Video Signal Loss Detection	Yes
Time Display	Yes
Power shut down recover	Yes
Play Mode	1 Ch full screen or 4 Ch Quad
Hard Driver Alarm	HDD full alarm or Overwrite select
HDD Fail Alarm	Yes
OSD Language	English
New Events Mark	Yes
Color Fine-tune Function	Yes
Security code protection	Yes (6 digits)
View Mode	1 Ch full screen or 4 Ch Sequence
Picture Storage	2.5" HDD up to 1000GB
Video I/O	4 BNC Input/1 RCA output
Audio I/O	1 Chi input/1 Ch output (RCA)
Daylight Saving Time	Yes (Auto change after setting)
LAN connection	Optional (MPEG-4 Like Compression LAN Server)
Dimension	201(L)x105(W)x47(H)mm
Weight	1000g (without HDD)

Additional Images

Backup Camera